Product Information
RTS Series
Series RTS and YGF are designed to transform electromagnetic waves into heat, with the properties of high loss (dB), high resistance (Ohm-cm)>1011~NA, elastomeric and endurance for acid or alkaline. With lower than 0.3% of water absorption, series RTS and YGF typically absorb 99% of normally incident energy at a discrete frequency between 500MHz to 40GHz, fit to the temperature from -60oC to 80oC, and can be used up to 10 years.
YGF Series
Series RTS and YGF are designed to transform electromagnetic waves into heat, with the properties of high loss (dB), high resistance (Ohm-cm)>1011~NA, elastomeric and endurance for acid or alkaline. With lower than 0.3% of water absorption, series RTS and YGF typically absorb 99% of normally incident energy at a discrete frequency between 500MHz to 40GHz, fit to the temperature from -60oC to 80oC, and can be used up to 10 years.
YGF Series
Series RTS and YGF are designed to transform electromagnetic waves into heat, with the properties of high loss (dB), high resistance (Ohm-cm)>1011~NA, elastomeric and endurance for acid or alkaline. With lower than 0.3% of water absorption, series RTS and YGF typically absorb 99% of normally incident energy at a discrete frequency between 500MHz to 40GHz, fit to the temperature from -60oC to 80oC, and can be used up to 10 years.
MFA Series
MFA is a series of high-loss dielectric absorbers with several loss levels which can be tuned base on the filler loading or thickness. The materials of MFA are flexible open-cell foams with adhesive on its back, normally provided in 600(±10)mm*600(±10)mm sheets with thickness in the range of 3.5mm to 11mm, and can be readily cut any other customized requirement.
MFA Series
MFA series is a high-loss absorber that can be adjusted according to various loss standards according to the filling or thickness. The material is soft and easy to absorb foam. Under normal conditions, we provide each piece with its length and width. The size is 600 mm x 600 mm ±10 mm, and the thickness range is 3.5 ~ 11 mm. Various sizes and double-sided tape can be cut according to customer requirements.
MFA S Series
MFA series is a high-loss absorber that can be adjusted according to various loss standards according to the filling or thickness. The material is soft and easy to absorb foam. Under normal conditions, we provide each piece with its length and width. The size is 600 mm x 600 mm ±10 mm, and the thickness range is 3.5 ~ 11 mm. Various sizes and double-sided tape can be cut according to customer requirements.
YZ Series
The iron-based amorphous strip has an ultra-fine grain structure. With its high magnetic permeability, high saturation magnetic induction, low iron loss and excellent stability, it meets the needs of today's electronic products for high frequency, miniaturization and energy saving The need for direction development,
It can replace silicon steel, permalloy and ferrite, and is widely used in power and electronic products